Taixin Steel Co., Limited
Produce & Supply Steel Connect the World
Custom Support & Sale
Working Time
Round-the-clock
 |
Alloy 904L is an austenitic stainless steel intended for use under severe corrosion conditions, with a very good resistance to attacks in acidic environment, as sulphuric, phosphoric and acetic acid. Very good resistance to pitting corrosion, stress corrosion cracking and a much better resistance to crevice corrosion than steels of alloy 304L and alloy 316L. Used for chemical processing, pollution control equipment, oil and gas well piping, heat exchangers, acid production and pickling equipment.
If you are planning to buy 904L/N08904 material from professional manufacturers suppliers in China, please feel free to contact Wenzhou Taixin Steel Co.,Limited, equipped with productive factory, we are always at your service.
Pipe
Outer Diameter: 1mm-1500mm
Thickness: 0.1mm-50mm
Length: 1-12m
Surface: Annealed/Pickling/Polished
Shape: Round/Square/Hex
Technique: Hot Rolled/Cold Drawn
Sheet:
Thickness: 0.1mm-100mm
Width: 10-2000MM
Length: 1000mm-6000mm
Finish: NO.1, 2B, BA, NO.4, 8K, SB, Hairline,
brush, polished, PVC film, Laser film, etc.
Bar:
Diameter: 5.0-500mm
Length: 1-12m
Surface: Black/Pickled/Polished/HL
Shape: Round/Square/Hex
Alloy 904L is an austenitic stainless steel intended for use under severe corrosion conditions, with a very good resistance to attacks in acidic environment, as sulphuric, phosphoric and acetic acid. Very good resistance to pitting corrosion, stress corrosion cracking and a much better resistance to crevice corrosion than steels of alloy 304L and alloy 316L. Used for chemical processing, pollution control equipment, oil and gas well piping, heat exchangers, acid production and pickling equipment.
If you are planning to buy 904L/N08904 material from professional manufacturers suppliers in China, please feel free to contact Wenzhou Taixin Steel Co.,Limited, equipped with productive factory, we are always at your service.
Pipe
Outer Diameter: 1mm-1500mm
Thickness: 0.1mm-50mm
Length: 1-12m
Surface: Annealed/Pickling/Polished
Shape: Round/Square/Hex
Technique: Hot Rolled/Cold Drawn
Sheet:
Thickness: 0.1mm-100mm
Width: 10-2000MM
Length: 1000mm-6000mm
Finish: NO.1, 2B, BA, NO.4, 8K, SB, Hairline,
brush, polished, PVC film, Laser film, etc.
Bar:
Diameter: 5.0-500mm
Length: 1-12m
Surface: Black/Pickled/Polished/HL
Shape: Round/Square/Hex
